EasyManua.ls Logo

GOK SmartBox 4 - General Product Information; Safety Advice

GOK SmartBox 4
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SmartBox
®
4 / SmartBox
®
4 PRO
2 / 28 part no. 28 400 57 d
GENERAL PRODUCT INFORMATION
The electronic tank management system SmartBox
®
4 and SmartBox
®
4 PRO can be used
for remote monitoring of the liquids contained in unpressurized liquids tanks.
In addition to the registration of tank content and remote data transfer, other functions can be
implemented by system enhancements, e. g. temperature measurement, message about
system fault or connection to master control systems of the building. A Nano-SIM card is
required for remote data transmission.
Typically, a message will be received by the accounting management system www.smart-
inspector.com. Optionally, the messages can be received on any mobile phone.
The SmartBox
®
4 has relay control functions, e. g. for activating external alarm devices,
solenoid valves, or the dry-run protection function of pumps.
Via an integrated interface, a maximum of three more content indicators SmartBox
®
1, 2 or 3
can be connected whose measurements are also telecommunicated.
SmartBox
®
4 PRO allows the content of up to four tanks to be recorded and monitored
remotely.
Because of its modular design, the system can be modified to suit many different applications.
The indicated measurements are not calibrated for invoicing.
SmartBox
®
4 has a 2-line LCD display, a measuring input for connecting the probe, a
programmable relay with make and break switching output, a fault message input and an
integrated GSM modem for remote data transmission.
SmartBox
®
4 PRO has a 2-line LCD display, four measuring inputs to connect the probes, a
fault message input and an integrated GSM modem for remote data transmission.
SAFETY ADVICE
Your safety and the safety of others are very important to us. We have provided many
important safety messages in this assembly and operating manual.
Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word
“DANGER”, WARNING, or “CAUTION. These words mean:
describes a personal hazard with a high degree of risk.
May result in death or serious injury.
describes a personal hazard with a medium degree of risk.
May result in death or serious injury.
describes a personal hazard with a low degree of risk.
May result in minor or moderate injury.
describes material damage.
Has an effect on ongoing operation.
describes a piece of information describes a call to action

Related product manuals