SmartBox
®
4 / SmartBox
®
4 PRO
part no. 28 400 57 d 3 / 28
ABOUT THE MANUAL
• This manual is part of the product.
• This manual must be observed and handed over to the operator to ensure that
the component operates as intended and to comply with the warranty terms.
• Keep it in a safe place while you are using the product.
• In addition to this manual, please also observe national regulations, laws and
installation guidelines.
This assembly and operating manual is aimed at users and operators of this product.
These persons
must have read and understood the assembly and operating manual.
The physical and psychical requirements for proper and safe handling of the product
must be ensured at all times!
INTENDED USE
Operating media
Operating media with consideration of the otherwise suitable probe type and accessories,
see:
Please comply with the “Level gauge type FSA-W 4-20 mA for
SmartBox
®
1 – 4” assembly and operating manual!
Comply with the “Level probe” assembly and operating manual!
You wil
l find a list of operating media with descriptions, the relevant
standards and the country in which they are used in the Internet at
www.gok.de/liste-der-betriebsmedien.
Escaping, liquid operating media:
• are hazardous to the aquatic environment
• are inflammable category 1, 2 or 3 liquids
• can ignite and cause burning
• can cause injury through people falling or slipping
Capture operating media during maintenance work.
Installation location
• with protection type IP54, indoors and outdoors, if protected against the weather
May not be used in potentially explosive areas.
Can cause an explosion or serious injuries.
Must be installed by a specialised company in accordance with local industrial
health and safety regulations.
Installation outside the defined EX protection zone.
Malfunctions caused by flooding!
The product is not designed for installation in areas prone to flooding or risk
areas.
Following flooding, the product must be replaced!
To Next Page
Loading...
