GOK SmartBox 4 - List of Commands

SmartBox
®
4 / SmartBox
®
4 PRO
part no. 28 400 57 d 21 / 28
Form of the SMS messages sent by the unit
An SMS message takes the following form:
Header; reason for the message; tank content(s); alarm status; credit/SMS counter;
relay status
Header
Freely selectable text.
This header text is sent as the first part of each reporting SMS message.
It should e.g. contain the customer’s number and address etc.
Example: Ct-024 Tankmonit. K. Miller, Levenham Rd.21
Reason for
the message
Info; Grenzwert Tank x; Betankung tank x; see table above
Tank
content
The contents of tanks 1 - 4, if applicable, are mentioned successively in the
message text. Example: ... ,100%=9999L, 100%=10.00, 74%=29.65; ...
In each case, the percentage and the current liter value is given.
Liter values exceeding 9999 l are given as a numerical value with decimal
place(s), but without unit, e.g.: 10,00 (cubic meters) or 29,65 (cubic meters)
If ???? is reported for a tank, this tank does not provide any current values
(the SmartBox
®
gets no more data from the additional indicator).
Alarm
The status of the alarm input (DIGITAL INPUT) is reported in plain text, e.g.:
• kein Alarm (no alarm)
• Alarm 1 Anlagenstörung  the text Anlagenstoerung (Facility failure)
can be changed (Command #A1)
• Alarm 1 OK  OK report, i.e. alarm 1 has been cancelled
• Alarm Tank n  Tank display device n reports a fault or an
alarm
• Alarm Tank n OK  OK report; i.e. the fault/alarm has been
cancelled
• Temp-Alarm n  Tank n has fallen below the set temperature
• Temp-Alarm n OK  OK report; i.e. the temp alarm from tank n has
been cancelled
Credit or
SMS
counter
The credit remaining on a prepaid card is indicated if the service provider
allows this function (USSD process). In Germany this is possible in the T-
Mobile, Vodafone and O
2
networks. For contract cards, this function makes
no sense; for them, an SMS counter should be activated, see #G=.
Relais
Rel=0  Relay OFF ; Rel=1  Relay ON  only SB 4
Error
Command error: - The SMS only shows this element if an error is pending -
The SmartBox
®
has received a command that is invalid and cannot be
processed. Check the format of command  see List of commands
Example
message
Ct-024 Tankmonit. K. Miller, Levenham Rd.21; Tank filling 2;
33%=1600L, 40%=40.00, 100%=99.99; no alarm; 14.81 £, Rel=0
LIST OF COMMANDS
The commands to the SmartBox
®
are sent automatically if the www.smart-inspector.com
system is used. Alternatively, they can be sent manually via SMS from a mobile phone.
All commands start with the # character (command character).