14
FS 130 /FS170
Danger: Never touch rotating parts like blade shaft or blade while opera-
ting!
Danger: Rotating parts may pull in clothing! Wear tightly cloth ing!
Danger: Down coming parts can cause injuries to the op er a tor!
"0"-position
Main switch
FS 130 E
2
1
Information: Clean all fastening devices of the blade (fl anges, thread of the blade
shaft, screws and nuts) before mounting the blade!
Cut off the engine or disconnect the power supply before mounting or changing blade.
Operating elements
1. Foot pedal - rising and low er ing-
2. Depth control
The working area is reserved only for the operator. Keep unauthorized persons out of the working
area.
Make sure the operator always has well sight to the working area. He always has to intervene in the
working process.
Never operate the fl oor saw without mounted safety devices.
In the cutting speed range all used blades must be designed for the max. rpm of the fl oor saw.
Never use faulty or damaged blades.
Danger: Faulty or damaged blades can cause injuries to the op er a tor and other
persons!
Check the correct rotation of the blade to the spindle shaft.
Information: Wrong rotation of the blade will result in more wear of the bla-
de!
To Next Page
Loading...