15
WS 32
When travelling on public roads, ways and places always observe the valid traf fi c regulations and, if ne-
cessary, make sure beforehand that the fl oor saw is in a condition compatible with these regulations.
After operating secure the fl oor saw against unintentional moving.
Danger: Demolitioning parts can cause injuries to the operator while cut-
ting!
Danger: The sound pressure may exceed 85 dB(A)!
Appropriate to the application of the fl oor saw it could be necessary to wear fur ther protective equip-
ment.
Danger: Down coming parts at the building site can cause in ju ries to the
operator!
Mounting the blade
Cut off the engine before mounting the blade. Mount
a blade with arbor hole of 25.4 mm - 1 in. Check the
correct rotation - arrows on the blade and blade guard.
Attach the blade guard.
Check the blade is well fastened before beginning to operate.
Use only blades suitable to the blade acceptance (arbor hole, fl anges).
Use only blade suitable to the material to be cut.
Check the correct water fl ow to the blade.
If harmful or explosive stuffs like dust, milk-of-lime arise while cutting, observe local regulations.
Danger: Wrong rotation of the blade may result in segment damage or loss
and can cause injuries to the operator or other persons!
Use the fl oor saw only with blades
which have a rated cutting speed
(DIN EN 13236) of 80 m/s!
To Next Page
Loading...