22
FS 130 /FS170
Wearing parts are the parts subject to operation-related (natural) wear during pro per use of the
device. The wearing time cannot be uniformly defi ned, and differs according to the intensity
of use. The wearing parts must be adjusted, maintained and, if necessary, replaced for the
specifi c device in accordance with the manufacturer’s operating manual. Operation-related
wear is not a reason for defect claims.
• Feed and drive elements such as toothed racks, gearwheels, pinions, spindles,
spindle nuts, spindle bearings, cables, chains, sprockets, belts
• Seals, cables, hoses, packings, connectors, couplings and switches for pneu-
matic, hydraulic, water, electrical and fuel systems
• Guide elements such as guide strips, guide bushes, guide rails, rollers, bea-
rings, sliding protection supports
• Clamping elements for quick-separating systems
• Flushing head seals
• Slide and roller bearings that do not run in an oil bath
• Shaft oil seals and sealing elements
• Friction and safety clutches, braking devices
• Carbon brushes, commutators/armatures
• Easy-release rings
• Control potentiometers and manual swiching elements
• Securing elements such as plugs, anchors, screws and bolts
• Fuses and lamps
• Auxiliary and operating materials
• Bowden cables
• Discs
• Diaphragms
• Spark plugs, glow plugs
• Parts of the reversing starter such as the starting rope, starting pawl, starting
roller and starting spring
• Sealing brushes, rubber seals, splash protection cloths
• Filters of all kinds
• Drive rollers, defl ection rollers and bandages
• Cable anti-twist elements
• Running and drive wheels
• Water pumps
• Cut-material transport rollers
• Drilling, parting and cutting tools.
Wearing parts for contruction devices mentioned in the operating manual
such as drilling and sawing machines
Wearing parts of this machine are marked in the spare parts list page 23 with () and the
spare parts with (#).
To Next Page
Loading...
Need help?
General
