DIGITAL MANOMETER T210
15
Range
code
Relative
(G)
Vacuum
(V)
Combined
(E)
(3)
Differential
pressure
(D)
(1)
Absolute
(A)
Resolution
Display
reading
025 (4) 0 – 25 -25 / 0 -25 / +25 (2) -25 / +25 – 0.01
070 (4) 0 – 70 -70 / 0 -70 / +70 (2) -70 / +70 – 0.01
300 (4) 0 – 300 -300 / 0 -300 / +300 -300 / +300 0 – 300 (*) 0.1
101 0 – 1 -1 / 0 -1 / +1 -1 / +1 (4) 0 – 1 0.0001
201 0 – 2 – -1 / +2 -1 / +2 (4) 0 – 2 0.0001
701 0 – 7 – -1 / +7 -1 / +7 (4) 0 – 7 0.001
172 0 – 17 – -1 / +17 – – 0.001
352 0 – 35 – -1 / +35 – – 0.01
702 0 – 70 – – – – 0.01
173 0 – 170 – – – – 0.01
353 0 – 350 – – – – 0.1
105 0 – 1000 (**) – – – – 0.1
(*) not available with 0.1% FS uncertainty
(**) Execution with external sensor Connection to process, 1/4 -inch BSP M. Maximum
overpressure: 10%.
(1) Maximum static pressure 3 times the range or 14 bar (whichever is less)
(2) Maximum static pressure 300 mbar
(3) For combined ranges, the uncertainty is in % above SPAN
mbar bar
Table of existing ranges according to input type
Series
Range code
(see table)
Uncertainty
1 - 0.25% FS (all codes)
2 - 0.1% FS (all codes except (*))
Entry
G - Realtive pressure
V - Vacuum
A - Absloute pressure
D - Differential pressure
E - Combined (vacuum - pressure)
To Next Page
Loading...