DIGITAL MANOMETER T210
9
MANOMETER-MILLI-AMMETER ALTERNATIVE OPERATION
Once the T210 is ready for operation in accordance with the section seen on
this and the previous pages, it can be employed for combined reading of
pressure or current by simply using the P/mA switch on the front panel.
This possibility is specially helpful with pressure and current transmitters.
When the mA icon is visible, the displayed readings are current values. When
this indicator is not visible, the displayed readings are pressure values.
NOTE: The T210 instrument includes current input protection against current
peaks and voltages up to 30 V.
To Next Page
Loading...