parameter of the battery.
Method II: Setting via LCD
Step 1: Click on the screen or select the settings icon > Quick Setting > BAT
Setting>Lead-acid through the button, select the model from the optional list, and enter
the settings page.
Step 2: Set parameters according to actual needs.
Please set it according to the battery technical
parameters.
The internal resistance of the battery. Please set
it according to the battery technical parameters.
By default, when the temperature is higher than
25℃, the upper limit of charging voltage will
decrease by 3mV for every 1℃ increase. The
actual settings should be based on the technical
parameter of the battery.
Lower Limit Of
Discharge Voltage
Please set it according to the battery technical
parameters.
To Next Page
Loading...
