7.3 LSI 9361-8i Group RAID
7.3.1 Configuring RAID in UEFI Boot Mode
Enter the RAID card configuration interface
a) During the server startup, press Delete/Esc as prompted to enter the BIOS Setup
interface.
b) Select Advanced>AVAGO MegaRAID <AVAGO MegaRAID SAS
91311-8i>Configuration Utility and press Enter.
c) As shown in Figure 3-1, five types of configuration tasks are displayed on the
interface (for details, see Table 1-2).
Figure 3-1 RAID card configuration interface
Table 3-1 Parameter description
Select Configuration Management to perform tasks such as
creating a logical disk, viewing disk group properties, viewing hot
spare information, and clearing the configuration.