Gooxi Purley Platform 1U User Manual

<16>
Power switch
button/indicator
Power indicator description:
 Steady green: The device is powered on.
 Green (flashing): Indicates that the device is in the standby state.
 Green off: The device is not powered on.
Power button description:
 Short press the button in the boot state, the OS shuts down
normally.
 Press and hold the button for 6 seconds to turn off the server.
 When the power is turned on, press this button briefly to boot.
UID button/indicator
The UID button/indicator is used to conveniently locate the server to be
operated. It can be turned off or on by pressing the UID button or remote
control via iBMC command.
UID indicator description:
 Blue (solid/blinking): Indicates that the server is located.
 Off: The server is not located.
UID button description:
 Short press this button to turn the positioning light on/off.
System fault
indicator
 Off: The device is operating normally.
 Blinking yellow: It indicates that the device is faulty during
operation.
Fan failure indicator
 Off: The fan is normal.
 Blinking yellow: The fan has failed.
Network port
connection status
indicator
Corresponds to the Ethernet port indicator of the network card.
 Green (Chang): indicates that the network port is connected
properly.
 Off: The network port is unused or faulty.
Instructions
Corresponds to two 1GE network ports on the motherboard.
Network port
connection status
indicator
Corresponds to the Ethernet port indicator of the network card.
 Green (Chang): indicates that the network port is connected
properly.
 Off: The network port is unused or faulty.
Instructions

Gooxi Purley Platform 1U Specifications

General

Brand	Gooxi
Model	Purley Platform 1U
Category	Server
Language	English