104 105
Your HERO5 Session
™
comes with a Standard Frame.
Note: To prevent the frame from marking the surface of your camera, leave the latch on the frame
open when storing your camera in a frame for a long period of time.
The HERO5 Session camera is waterproof to 33’ (10m) with the door
closed—no additional housing is needed when using the camera in or
around water.
NOTICE: The Standard Frame does not provide additional waterproof
protection for your camera.
/Mounting Your Camera
TO SECURE THE CAMERA IN THE FRAME:
1. Open the latch.
2. Rotate the camera to the desired orientation, and then slide it into
the frame. The back of the frame has a raised edge. Be sure the
back of the camera sits flush against it.
3. Close the latch.
/ Mounting Your Camera
To Next Page
Loading...
