GoPro Hero session - Troubleshooting; MY GOPRO WONT POWER ON; MY GOPRO WONT RESPOND WHEN I PRESS A BUTTON

122 123
Do not dry the camera or battery with an external heat source such
as a microwave oven or hair dryer. Damage to the camera or battery
caused by contact with liquid inside the camera is not covered under
the warranty.
Do not make any unauthorized alterations to the camera. Doing so
may compromise safety, regulatory compliance, performance, and
may void the warranty.
WARNING: Do not drop, disassemble, open, crush, bend, deform,
puncture, shred, microwave, incinerate, or paint the camera.
Do not insert foreign objects into any opening on the camera,
such as the micro-USB port. Do not use the camera if it has been
damaged—for example, if cracked, punctured, or harmed by
water. Disassembling or puncturing the integrated battery can
cause an explosion or fire.
/ Battery
MY GOPRO WON’T POWER ON
Make sure your GoPro is charged. To charge your camera, use the
included USB cable and a computer. You can also use a charging
device manufactured by GoPro.
MY GOPRO WON’T RESPOND WHEN I PRESS A BUTTON
Press and hold the
Menu button [ ] for about eight seconds until
your camera powers off. This reset saves all of your content and
settings.
/ Troubleshooting