GoPro Hero session - Maintenance

116 117
/Maintenance
Follow these guidelines to get the best performance from
your camera:
• The camera is waterproof to 33’ (10m)—no housing needed.
Ensure that the door is closed before using the camera in
or around water, dirt, or sand.
• Before closing the side door, be sure the seal is free of debris.
If needed, clean with a blower brush or canned air.
• Before opening the door, be sure the camera is free of water or
debris. If needed, rinse the camera with water and dry it with a cloth.
• If sand or debris hardens around the door, soak the camera in
warm tap water for 15 minutes and then rinse thoroughly to
remove the debris before opening the door.
• For best audio performance, shake the camera or blow on the mic
to remove water and debris from the microphone holes.
• Aer every use in salt water, rinse the camera with fresh water,
and dry with a so cloth.
• If the camera lens becomes foggy, let it sit with the door open until
it dries.
PRO TIP: During water activities, tether your camera for added
security and use a Floaty to keep your camera afloat (sold separately).
For more information, visit gopro.com.
/ Maintenance