GoPro Hero session - CAPTURING TIME LAPSE CONTENT WITH QUIKCAPTURE

16 17
2. To stop recording, press the Shutter button [ ] again.
The camera stops recording, beeps several times, and
automatically powers off to maximize battery life.
/ QuikCapture
CAPTURING TIME LAPSE CONTENT WITH QUIKCAPTURE
1. With the camera powered off, press and hold the Shutter button
[
] for a few seconds until recording begins.
Your camera powers on, beeps several times, and begins recording
in the time lapse capture mode that you last used (Time Lapse
Photos, Time Lapse Video, or Night Lapse). The camera status
lights blink while the camera is recording.
2. To stop recording, press the Shutter button [
] again.
The camera stops recording, beeps several times, and
automatically powers off to maximize battery life.
/ QuikCapture