22
MDE-LEDI160S-1012V1.0
CONNECTIONS
3. CONNECTIONS
SUPPLY
( B4 )
CHRONOMETER
Input
( B2 )
ASCII
terminal
( B3 )
3 2 1
SYNCHRONISATION
input
( B1 )
Switch
ON/OFF
( SW1 )
" + "
push button
" - "
push button
" PROG "
push button
3.1. STANDARD AND FLUSH-MOUNTABLE CASES:
► Connect the 230VAC 50-60Hz supply.
► Switch the battery main switch SW1 to the ON position (lower position).
► Connect the synchronisation input to terminal B1, if necessary (no polarity).
► Connect the optional accessories (chronometer - B2, ASCII - B3).
To Next Page
Loading...
