Gossen MetraWatt METRA HIT 22S User Manual

GMC-I Gossen-Metrawatt GmbH 3
GB
Digital Display Symbols
1 Continuous operation
2 Digital display with display of decimal point and polarity
3 Manual measuring range selection
4 Memory display, “hold measurement value”
5MIN-MAX storage
6Event marking
7 Selected current type
8 Unit of measure
9 Measuring range exceeded
10 Pointer for analog display
11 Analog display scale
12 Violation of negative analog display range
13 Stopwatch activated
14 Zero balancing
15 Memory mode
16 Low battery
17 Acoustic signal on
Meaning of symbols on the instrument
Warning concerning a point of danger
(Attention: observe documentation)
Earth
Continuous, doubled or reinforced insulation
CAT II/III/IV
Measurement category II / III and/or IV device
CSA approval mark
(North American test authority)
Indicates EC conformity
This device may not be disposed of with the trash.
Further information regarding the WEEE mark can be
accessed on the Internet at www.gossenmetrawatt.com
by entering the search term ’WEEE’.
123 7
8
910
1112
13
16
17
14
15
REM
4 56
!
Consecutive number
Registration number
Date of calibration (year – month)
German calibration service – calibration laboratory
B0730
01-04
DKD-K-
19701

Gossen MetraWatt METRA HIT 22S Specifications

General

Brand	Gossen MetraWatt
Model	METRA HIT 22S
Category	Measuring Instruments
Language	English