GMC-I Gossen-Metrawatt GmbH 55
GB
Battery Replacement
➭ Lay the instrument onto a flat surface with the front panel
facing down, loosen the two screws at the back and lift
out the housing base starting at the bottom. The housing
base and top are held together at the upper front side
with the help of snap hooks.
➭ Remove the battery from the battery compartment.
➭ Insert two 1.5 V mignon cells into the battery compart-
ment in the direction indicated by the polarity symbols.
➭ Important for reassembly: First set the housing base
onto the housing top and align accurately (see photo
below). Then press the two housing halves together, first
at the bottom front (a), and then at the top front (b).
➭ Retighten the housing base with the two screws.
➭ Please dispose of used batteries properly!
(b) (a)
To Next Page
Loading...
