GPD WIN 4 - Q6: When My WIN Max 2 System Is Broken, I Don`t Know How to Re-Install System, How Can I Implement the One Key Recovery

深圳市中软赢科技术有限公司 版权所有 Shenzhen GPD Technology Co.Ltd All Rights Reserved
31 / 50
Q6: When my WIN Max 2 system is broken, I don`t know how to re-install system, how can I implement the "one ke
y recovery" ?
A6: "one key recovery" is available, you can follow the steps below:
Step 1st: turn off the device, press the "power key" while booting, press and hold the "Tab" key.
Step 2nd: Click "Start" to recovery the factory system, click "Exit" to exit the function. The restoration process is shown in the figure below.You need to wait for ab
out 15 minutes. After the completion, it will restart and enter the system automatically.
Cautions:
 When recovering, the power must be kept above 50%, or plugged into the charger, the power below 50% will not be able to recovery.
 The system recovery will clear all data on the C drive. Please back up important files in advance. The recovery interface supports touch screen and mouse ope
rations.