深圳市中软赢科技术有限公司 版权所有 Shenzhen GPD Technology Co.Ltd All Rights Reserved
4 / 50
[Englis] GPD WIN 4 Q&A
Q1: How to adjust the TDP power consumption of equipment?
A1: Please use the "MotionAssistant" provided by the system, which contains several system optimization tools, as show
n in the right figure.
It can also be downloaded via the link below:
https://gpd.hk/gpdwin42023firmwaredriver
Q2: How to turn the keyboard backlight on or off?
A2: The operation is very simple. The keyboard backlight can be enabled by pressing the
Fn + Space key combination. The keyboard backlight is turned on by default and stays on,
and the brightness is divided into two levels. Therefore, assuming that the keyboard light
is in the off state, pressing the key combination three times in sequence means the keybo
ard light is weak, the keyboard light is strong, and the keyboard light is off.
Notice:
The backlight of the keyboard will consume power, so it is recommended to turn it off during the day.
Q3: When my WIN 4 system is broken, I don`t know how to re-install system, how can I implement the "one key rec
overy" ?
A3: "one key recovery" is available, you can follow the steps below:
Step 1st: turn off the device, press the "power key" while booting, press and hold the "Tab" key.
Step 2nd: Click "Start" to recovery the factory system, click "Exit" to exit the function. The restoration process is shown in the figure below.You need to wait for ab
out 15 minutes. After the completion, it will restart and enter the system automatically.
Cautions:
When recovering, the power must be kept above 50%, or plugged into the charger, the power below 50% will not be able to recovery.
The system recovery will clear all data on the C drive. Please back up important files in advance. The recovery interface supports touch screen and mouse ope
rations.
Q4: I also bought a GPD G1, what should I pay attention to?
A4: The process of connecting the external graphics card dock is as follows:
To Next Page
Loading...