7
(ID: 040708)
#6 X 5/8" Wood Screw
Leveling Foot Saddle
Leveling Foot
M3.5 x 15mm
Wood Screw
Step 1: Leveling Feet Assembly
•
•
WELCOME!
As you begin assembly of your new GMQ Pro home machine quilting system, keep in the mind the
following:
1) Plan to spend a minimum of 2-4 hours in assembly. This process will be simple and step-by-step.
2) Read through each step completely before beginning that step.
3) Using the parts list as a reference, take the parts out of the box and make sure that you have them all. (If there
is something missing or broken, contact the Grace Company at 1-800-264-0644. Our ofces are open from 8:00 am-
5:00 pm MST Mon.-Fri. If calling after hours, you may leave your message and we will promptly ship any item
needed).
4) For your convenience, an “L” and “R” have been etched into the INSIDES of most pieces to help you distinguish
between left and right parts and inside and outside of parts.
5) Identify Hardware Packets: All hardware is separated by type and each packet is labeled for ease in identication
you will nd packets located in a rectangular box.
6) This is a new product! We welcome your feedback on this product or these instructions. If you encounter a
problem during assembly or use of the GMQ Pro, and you can’t seem to overcome it, call us before frustration sets
in!
Tools Needed:
10mm Socket Wrench
Adjustable wrench
Phillips Screw Driver (Cordless Preferred)
3mm, and 4mm Allen wrenches (provided)
Fabri-Fast Tool (to be used when installing your fabric)
To Next Page
Loading...
