Graco 015.050-DP - DATA

- 04 - B.6.20.44-P
F22.060.02, issued on 01.98
DATA
Max. Suction height 7.8 m
Lowest operating temperature 10 °C
(without special measures)
Max. fluid temperature (operating temperature) 90 °C
The accessories for the fluid side (pressure accessories) of the MERKUR 2000 programme
are not in every case suitable for the reciprocating pump 060.020-DP.
– note the permissible operating pressure
When used for paint spraying: use silicone-free process materials
(air pressure) and accessories only.
Key
V = Flow rate
DH= Double stroke
I = Fluid operating overpressure
Air inlet overpressure
Air
Vh For stroke volume see table above
F actual stroke frequency in DH/min
P actual air inlet overpressure in bar
in l/min
Reciprocating pump
Stroke frequency in DH/min
Continuous operation full load
Continuous operation partial load
Intermittent operation full load
Intermittent operation partial load
Theoretical
transmission
ratio
Air
Max.
permissible
inlet
overpressure
Max.
permissible
operating
overpressure
(Nominal
pressure)
Stroke
volume
Volume
Material
Reciprocating pump
Max.
Flow Volume
DIN 24374 T1
l/min
V= 0.4 m/s
V= 0.7 m/s
V= 1.5m/s
Stroke
Frequency
in DH/min
Flow Volume
in l/min
Stroke
Frequency
in DH/min
Flow Volume
in l/min
Flow Volume
in l/min
Stroke
Frequency
in DH
/
min
Fluid- max. flow Volume (pump delivery)