Graco 17C325 - User Manual

334641E
EN
Operation, Parts
RentalPro 230PC HDR
Electric Airless Sprayer
For portable airless spraying of architectural paints and coatings. For
professional use only. Not approved for use in explosive atmospheres or
hazardous locations.
Models 17E851 and 17C325:
3300 psi (228 bar, 22.8 MPa) Maximum Working Pressure
Important Safety Instructions
Read all warnings and instructions in this manual, in related manuals, and on the unit
before using the equipment. Be familiar with the controls and the proper usage of the
equipment. Save these instructions.
Related Manuals
Gun – 312830 (SG3) Pump – 334599
Use only genuine Graco replacement parts.
The use of non-Graco replacement parts may void warranty.
110474 Certified to CAN/CSA C22.2 No. 68
Conforms to UL 1450

Summary

Warnings

Grounding

Ensures electrical safety and prevents static discharge during operation.

Component Identification

Grounding

Power Requirements

Pressure Relief Procedure

Setup

Startup

Operation

Spray Tip Installation

Spray

Clear Spray Tip Clog

Procedure for clearing a clogged spray tip.

Maintenance

Troubleshooting

Mechanical;Fluid Flow

Addresses issues related to pump output and fluid movement.

Electrical

Diagnoses issues related to sprayer power or motor.

Electrical cont...

Flowchart for diagnosing sprayer electrical faults.

Sprayer Parts

Technical Specifications

Graco 17C325 Specifications

General

Brand	Graco
Model	17C325
Category	Paint Sprayer
Language	English