To Next Page

To Previous Page

Accessories

30 309577T

Accessories

Wet-Cup Conversion Kits

These kits convert 245970, 245971, 262648, or 245972 pumps to the wet-cup flush design. Refer to the following

table to select the correct kit for your pump. Kits include a Pump Wet-cup Flush Kits manual.

246928 Reservoir Kit

This kit is included with Wet-Cup Conversion Kits 248061, 248062, and 248063 (see above).

This kit can also be used if replacing an earlier style ISO pump with the wet-cup flush design. Order this kit

separately, and order the correct pump for your Reactor from page 20.

Kit includes reservoir, tubing, mounting hardware, and fittings to supply TSL to flush wet-cup. Includes Pump

Wet-cup Flush Kits manual.

Throat Seal Liquid

Use in reservoir for piston style wet-cups on component A pumps, or to fill wet-cup of component B pumps.

217374 ISO Pump Oil

Use in wet-cups of non-piston style component A pumps (built before May 2003), and as thread lubricant when

rebuilding pumps.

Part Wet-Cup Conversion Kit

245970, 24Y174 248061, includes:

246962 Wet-Cup Kit

(see page 22 for parts)

246928 Reservoir Kit

(see below)

245971, 262648 248062, includes:

246963 Wet-Cup Kit

(see page 22 for parts)

246928 Reservoir Kit

(see below)

245972 248063, includes:

246964 Wet-Cup Kit

(see page 22 for parts)

246928 Reservoir Kit

(see below)

Part Quantity

206995 1 qt (1 l)

206996 1 gal. (3.8 l)

Graco A Series Instructions

Other manuals for Graco A Series