Graco A Series Repair Parts

Accessories
26 309577D
Accessories
Wet-Cup Conversion Kits
These kits convert 245970, 245971, or 245972 pumps
to the wet-cup flush design. Refer to the following table
to select the correct kit for your pump. Kits include
instruction manual 309911.
246928 Reservoir Kit
This kit is included with Wet-Cup Conversion Kits
248061, 248062, and 248063 (see above).
This kit can also be used if replacing an earlier style ISO
pump with the wet-cup flush design. Order this kit sepa-
rately, and order the correct pump for your Reactor from
page 22.
Kit includes reservoir, tubing, mounting hardware, and
fittings to supply TSL to flush wet-cup. Includes instruc-
tion manual 309911.
Throat Seal Liquid
Use in reservoir for piston style wet-cups on component
A pumps, or to fill wet-cup of component B pumps.
217374 ISO Pump Oil
Use in wet-cups of non-piston style component A pumps
(built before May 2003), and as thread lubricant when
rebuilding pumps.
Pump Part No. Wet-Cup Conversion Kit
245970 248061, includes:
246962 Wet-Cup Kit
(see page 23 for parts)
246928 Reservoir Kit
(see below)
245971 248062, includes:
246963 Wet-Cup Kit
(see page 23 for parts)
246928 Reservoir Kit
(see below)
245972 248063, includes:
246964 Wet-Cup Kit
(see page 23 for parts)
246928 Reservoir Kit
(see below)
Part No. Quantity
206995 1 qt (1 liter)
206996 1 gal. (3.8 liters)

Graco A Series Specifications

General

Brand	Graco
Model	A Series
Category	Water Pump
Language	English