Troubleshooting
PROBLEM
2
quart lid, and
2
1/2
gal pot wing nuts.
.~
~
ization
Check for leaks at the container gasket,
No
fluid delivery.
Remote Container Pressur-
SOLUTION
CAUSE
connect at compressor outlet (approx.
Check for air flow from male quick-dis.
1/4
CFM).
Turn pressure regulator clockwise.
Look
for pressure on gauge.
(If
no pressure
on gauge, check air line and fittings).
Check hole
in
tank
lid
under regulator
01
needle valve
2
Qt lid. Clean
if
necessary
I
Check
if
fluid pickup tube is unplugged.
Tiahten.
Blow out and clear material hose.
Check container for material.
~ ~
(CX-8) Compressor fails to
Cold weather operation.
start
tions, page
8.
Turbine fails to start
Clean filter.
Dirty filter. Poor atomization
Cycle red rocker switch.
Power supply.
~ ~
See Cold Weather Operation instruc-
~~~
I I
Extension cord too long.
Replace with shorter extension cord (do
not exceed
100
fl).
I
~~
Hose length too long.
~~ ~~~
Replace with shorter hose. See Acces-
sories
for
shorter hose and P/N.
Red Rocker Circuit Breaker
Switch Trips
Clean filter and replace as necessary. Check filter.
Excessive high ambient temperature.
Move turbine to cooler area.
Excessive brush wear.
~~
r-
~
~___
Remove turbine wrapper and:
.
Check for free motor rotation,
.
Check brush wear,
.
Replace motor brushes if necessary,
I
Excessive current draw.
I
Return to authorized service center.
I
fortably warm.
Spray gun handle is uncom-
'
Hot and humid weather can generate
temperatures that make gun handle
Extra hose is recommended in warm-
uncomfortable.
er environments.
Install handle insulator (provided with
gun).
308-422
11
To Next Page
Loading...
Need help?
General
