For
Professional Use Only. Observe
All
Warnings.
Read and understand all instruction manuals before operating equipment.
EQUIPMENT MISUSE
HAZARD
Any misuse of the spray equipment or accessories,
General Safety
Read and follow the fluid and solvent manufactur-
er's literature regarding the use of protective
such as improper usage, over pressurizing, modifying
parts, using incompatible chemicals and fluids, or
eyewear, gloves, clothing, respirator and other
equipment.
using worn or damaged parts, can cause them to rup-
ture and result in serious injury, fire, explosion or Fluid Compatibility
property damage. Be sure all fluids and solvents used are chemically
ComDatible with the "Wetted Parts" shown
in
the
Never point the spray gun at anyone or at any part
Specifications on page
5.
Always read the fluid and
solvent manufacturer's literature before using the fluid
or solvent in this
gun.
of the body.
Never put hand or fingers over the spray nozzle.
Do
not use 1
,I
,l-trichloroethane, methylene chloride,
0
Never try to stop or deflect leaks with your hand or taining such solvents in the turbine spray system,
parts. Such use could result
in
a serious chemical
other halogenated hydrocarbon solvents or fluids con-
body. which contains aluminum and/or galvanized-coated
Always turn
off
the air supply
to
the gun before
reaction, with the possibility of explosion, which could
cause death, serious injury, and/or substantial prop-
erly damage.
removing the spray gun cup.
Check all spray equipment regularly and repair or System Pressure
replace worn or damaged parts immediately.
The
CX-7 and CX-8 have a psi of
5
(0.34
bar) and
the CX-9 has a psi of
6
(0.41).
Never exceed the
Only use genuine Graco replacement parts when
maximum pressures of the turbine or any other corn.
ponent or accessory used in the system.
servicing the gun.
Never alter
or
modify any part
01
this equipment;
To
relieve pressure, turn
off
the turbine. For pressure
relief of remote pressure pots for the CX-8, refer to
the turbine gun manual,
308-336.
doing
so
could cause it
to
malfunction.
2
308-422
To Next Page
Loading...
Need help?
General
