All written and visual data contained in this document reflects the latest product i
nformation available at the time of publication.
The manufacturer reserves the right to make changes at any time without notice.
Original instructions. This manual contains English. MM 3A3234
Copyright 2015, All manufacturing locations are registered to ISO 9001.
Revision E, July 2018
Materials of Construction
Wetted materials on all models stainless steel, brass, leather, ultra-high molecular weight
polyethylene (UHMWPE), carbide, nylon, aluminum, PVC,
polypropylene, fluoroelastomer
Notes
* Startup pressures and displacement per cycle may vary based on suction condition,
discharge head, air pressure, and fluid type.
** Sound pressure measured 3 feet (1 meter) from equipment. Sound power measured per
ISO-9614.
When pump is stored with non-freezing fluid. Pump damage will occur if water or
latex paint freezes in pump.
Damage to plastic parts may result if impact occurs in low temperature conditions.
Changes in paint viscosity at very low or very high temperatures can affect sprayer
performance.
US Metric
To Previous Page
Loading...
Need help?
General
