Graco GM 3500 - TECHNICAL DATA; Specifications

307-863
39
TECHNICAL DA TA
Engine 3.5 Horsepower , Honda . . . . . . . . . . . . . . . . . . . . .
Maximum W orking Pressure 3000 psi (210 bar) . . . . . . .
Cycles/Gallon (liter) 200 (53). . . . . . . . . . . . . . . . . . . . . . . .
Maximum Delivery 0.85 GPM (3.2 liter/min) . . . . . . . . . . .
Fuel T ank Capacity 0.66 gallons (2.5 liter) . . . . . . . . . . . .
Maximum T ip Size 1 gun with 0.031 tip . . . . . . . . . . . . . . .
2 guns with 0.021 tip
Inlet Paint Strainer 16 mesh (1 190 micron) . . . . . . . . . . . .
Stainless Steel screen, reusable
Outlet Paint Filter 60 mesh (250 micron) . . . . . . . . . . . . . .
Stainless Steel screen, reusable
Pump inlet Size 3/4 npt (m). . . . . . . . . . . . . . . . . . . . . . . .
Fluid Outlet Size 1/4 npsm from fluid filter . . . . . . . . . . . .
Wetted Parts
Displacement Pump Carbon Steel, Plastic, Leather .
Filter Aluminum, Carbon Steel, Stainless Steel . . . . . .
NOTE: For information on converting your sprayer to one
that can safely pump fluids containing haloge-
nated
hydrocarbons, contact Graco Product Ser -
vice,
at 1–800–328–021 1.
DIMENSIONS
Model 220–040
Upright Cart without hose or gun
W
eight (dry , without packaging) 109 lb (49 kg) . . . . . . . .
Height 30.25 in. (768 mm). . . . . . . . . . . . . . . . . . . . . . . . .
Length 29.5 in. (749 mm). . . . . . . . . . . . . . . . . . . . . . . . . .
Width 22.25 in. (565 mm). . . . . . . . . . . . . . . . . . . . . . . . . .
Model 222–028
Lo–Boy Cart without hose or gun
W
eight (dry , without packaging) 95 lb (43 kg) . . . . . . . . .
Height 22.5 in. (571mm). . . . . . . . . . . . . . . . . . . . . . . . . . .
Length 32.0 in. (813 mm). . . . . . . . . . . . . . . . . . . . . . . . . .
Width 18.5 in. (470 mm). . . . . . . . . . . . . . . . . . . . . . . . . . .
SERVICE INFORMATION
The clutch replacement procedure on page 24 has been
improved.
Listed below by the assembly changed are OLD, NEW,
and ADDED parts. OLD and NEW parts are directly inter -
changeable.
Assembly
Changed
Part
Status
Ref
No.
Part No. Name
221–040
Upright
sprayer
Old
New
31 181–072
187–147
Strainer
Strainer
Old
New
66
66
109–099
108–805
Bushing
Bushing
Add 98 187–189 Nipple
222–028
Lo–Boy
Sprayer
Old
New
30d
30d
183–770
187–190
Strainer
Strainer