Graco LD Series - Technical Specifications and Data; Low Pressure Hose Reels and Hoses; Medium Pressure Hose Reels; High Pressure Hose Reels

Technical Data
313431A 31
Technical Data
Low Pressure Hose Reels and Hoses
Medium Pressure Hose Reels
High Pressure Hose Reels
Sound Data: All Hose Reels
Fluid Pressure
Air/Water, all hose diameters 300 psi (20.7 bar, 2.07 MPa)
Inlet 1/2” NPSM Male
Outlet 1/2”or 3/8” NPT Male
Operating Temperature -20°F to 190°F (-28°C to 87°C)
Wetted parts - Bare Hose Reel Only Zinc plated steel, anodized aluminum, Nitrile rubber
Dimensions Page 32
Fluid Pressure
Oil 2000 psi (172 bar, 17.2 MPa)
Inlet 1/2” NPSM Male
Outlet 1/2” or 3/8” NPT Male
Operating Temperature -20°F to 190°F (-28°C to 87°C)
Wetted parts - Bare Hose Reel Only Zinc plated steel, Nitrile rubber, steel
Dimensions Page 33
Fluid Pressure
Grease, 1/4” diameter hose 5000 psi (344 bar, 34.4 MPa)
Grease, 3/8” diameter hose 4000 psi (275.7 bar, 27.5 MPa)
Inlet 3/8” NPSM Male
Outlet 1/4” NPT Male
Operating Temperature -40°F to 200°F (-40°C to 93°C)
Dry Weight HR Model (for example HRH55B): 44 lbs (20 kg)
HP Model (for example HPH55B): 52 lbs (23.5 kg)
HS Model (for example HSH55B): 59 lbs (26.5 kg)
Wetted parts - Bare Hose Reel Only Zinc plated steel, Nitrile rubber, steel
Dimensions Page 34
Sound Pressure* HR Model: 83 dB(A)
HP Model: 80 dB(A)
HS Model: 78 dB(A)
Sound Power** HR Model: 90 dB(A)
HP Model: 87 dB(A)
HS Model: 88 dB(A)
*All readings taken at assumed retraction rate, from assumed operator position.
**Sound Power tester per ISO 9614-2.