Clutch Housing
312195B 15
Clutch Housing
Removal
1. FIG. 10. Remove four cap screws (186) and lock
washers (188) which hold clutch housing (85) to
engine.
2. Remove screw (177) from under mounting plate (96).
3. Pull off clutch housing (85).
Installation
1. FIG. 10. Push on clutch housing (85).
2. Install four cap screws (186) and lock washers (188)
and secure clutch housing (85) to engine. Torque to
200 in-lb (22.6 N•m).
3. Install capscrew (177) from beneath mounting plate
(96). Torque to 26 ft-lb (35.2 N•m).
F
IG. 10
177
96
188
186
85
88
TI6643
To Next Page
Loading...
