Graco LineLazer IV 5900 - Technical Data

Technical Data
312195B 35
Technical Data
Loctite
®
is a registered trademark of the Loctite Corporation.
Honda GX120 Engine (3900)
Power Rating @ 3600 rpm
ANSI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DIN 6270B/DIN 6271
NA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.0 Horsepower
2.1 Kw - 2.8 Ps
2.6 Kw - 3.6 Ps
Honda GX160 Engine (5900)
Power Rating @ 3600 rpm
ANSI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DIN 6270B/DIN 6271
NA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.5 Horsepower
2.9 Kw - 4.0 Ps
3.6 Kw - 4.9 Ps
Maximum working pressure . . . . . . . . . . . . . . . . . . . . . . . 3300 psi (228 bar, 22.8 MPa)
Noise Level
Sound power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sound pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
105 dBa, per ISO 3744
96 dBa, measured at 3.1 feet (1 m)
*Vibration Level
LineLazer IV 3900
Left hand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Right hand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LineLazer IV 5900
Left hand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Right hand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
* Vibration measured per ISO 5349 based on 8 hour daily
exposure
1.81 m/sec
2
1.45 m/sec
2
2.05 m/sec
2
1.70 m/sec
2
Maximum delivery
LineLazer IV 3900 . . . . . . . . . . . . . . . . . . . . . . . . . . .
LineLazer IV 5900 . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.15 gpm (4.4 liter/min)
1.5 gpm (5.7 liter/min)
Maximum tip size
LineLazer IV 3900 . . . . . . . . . . . . . . . . . . . . . . . . . . .
LineLazer IV 5900 . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 gun with 0. 034 in. tip
2 guns with 0.024 in. tip
1 gun with 0. 041 in. tip
2 guns with 0.028 in. tip
Inlet paint strainer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 mesh (1190 micron) stainless steel screen, reusable
Outlet paint strainer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 mesh (250 micron) stainless steel screen, reusable
Pump inlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/4 in. npt (m)
Fluid outlet size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4 npsm from fluid filter
Wetted parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . nickel-plated carbon steel, PTFE, Nylon, polyurethane,
UHMW polyethylene, fluoroelastomer, acetal, leather,
tungsten carbide, stainless steel, chrome plating