Keep Components A and B Separate
10 311075R
Keep Components A
and B Separate
Changing Materials
• When changing materials, flush the equip-
ment multiple times to ensure it is thor-
oughly clean.
• Always clean the fluid inlet strainers after
flushing, see page 28.
• Check with your material manufacturer for
chemical compatibility.
• Most materials use ISO on the A side, but
some use ISO on the B side.
• Epoxies often have amines on the B (hard-
ener) side. Polyureas often have amines on
the B (resin) side.
NOTICE
To prevent cross-contamination of the equip-
ment’s wetted parts, never interchange com-
ponent A (isocyanate) and component B
(resin) parts.
To Next Page
Loading...
