How to Spray
18 3A7649A
Refilling FlexLiner
If sprayer runs out of disinfectant, simply refill
the FlexLiner as follows:
1. Perform Pressure Relief Procedure,
page 10.
2. To allow disinfectant to drain from
VacuValve Reservoir, open the
VacuValve Cap.
3. Remove cup assembly from sprayer. Set
sprayer on a rag to capture any
disinfectant that may drip.
4. Separate Cup Lid from Cup Support.
5. Follow steps 3 – 10 in Starting a New
Job, page 13.
When spraying flammable or combustible
disinfectants:
• Move entire sprayer to a well-ventilated
area and away from flammable or
combustible materials, including
disinfectants, when refilling.
• Keep disinfectant containers covered
between cup refills.
ti29721a
To Next Page
Loading...
Need help?
General
