Technical Data
3A2988C 21
Technical Data
Maximum working pressure . . . 6000 psi (41 MPa, 414 bar) for A and B materials
4500 psi (31 MPa, 310 bar) for flushing fluid
100 psi (0.7 MPa, 7 bar) for heating fluid
Maximum fluid temperature . . . 180°F (82°C)
Fluidinlet ................. 3/4in.nptand3/4in.x1/2in.nipplefittings for 3/4 in. x 1/2 in. hoses
Fluidoutletsize............. 1/2in.npt(m)nipple
Solvent inlet valves .......... 1/4in.npt(m)
Heated fluid ports ........... 1/4in.npt(f)
Wettedparts............... Manifold block and internal parts: PTFE, electroless nickel plated steel, zinc plated
steel
Flush valves and fittings: stainless steel, plated carbon steel, hardened alloy steel,
acetal, PTFE
Fluid ball valves: plated carbon steel, acetal, PTFE, FKM
Fluid check valves: plated carbon steel, carbide seat, PTFE, alloy steel ball
To Next Page
Loading...
Need help?
General
