W
Wendy ShannonSep 10, 2025
What to do for basic electrical problems with the electric supply of my Graco Paint Sprayer?
To Next PageTo Next PageWhat to do for basic electrical problems with the electric supply of my Graco Paint Sprayer?
General| Brand | Graco |
|---|---|
| Model | Super nova 495 |
| Category | Paint Sprayer |
| Language | English |
Describes the product line for architectural paints and coatings.
Highlights critical safety warnings and instructions for manual use.
Details risks associated with flammable fumes and ignition sources during operation.
Outlines dangers of improper grounding, setup, and usage leading to electric shock.
Warns about high-pressure fluid injection injuries and necessary precautions.
Highlights dangers of improper use, modification, and operation of the equipment.
Details risks from exposure to hazardous fluids and fumes, requiring MSDS review.
Specifies essential PPE required for safe operation, servicing, and area presence.
Diagram and list identifying all major sprayer parts and their functions.
Details the necessity of grounding, plug requirements, and safe electrical connections.
Specifies voltage, amperage needs, and guidelines for using extension cords.
Provides instructions for using pails and grounding during pressure relief.
Details the procedure to safely relieve pressure, including handling clogs.
Instructions for connecting hoses, tightening fittings, and removing the tip guard.
Details inlet strainer check, packing nut lubrication, and power connection.
Guides on setting pressure, circulating fluid, and priming the system.
Instructions for assembling the spray tip and guard onto the gun.
Procedures for flushing the system and transitioning from flushing fluid to paint.
Guidance on testing spray patterns and adjusting pressure for optimal results.
Step-by-step instructions for safely clearing blockages in the spray tip.
Covers powering off, relieving pressure, and preparing for flushing.
Details on flushing the system with appropriate fluids and rinsing.
Instructions for plugging in and turning on the sprayer with a digital display.
How to change displayed pressure units between psi, bar, and MPa.
Steps to enter and navigate stored data, including model and runtime information.
How to view error codes, software revisions, and erase error data.
Navigating the main menu for pressure display and job data.
Accessing secondary menu options like error codes and software revision.
Procedure to switch between psi, bar, and MPa, affecting gallon/liter display.
Instructions on how to clear error codes and reset the system.
