Reference
3A3529C 31
Quick Reference
Page 10 Name Description
A Prime/Spray Valve
• In PRIME position directs fluid to drain tube.
• In SPRAY position directs pressurized fluid to paint
hose.
• Automatically relieves system pressure in overpres-
sure situations.
B PushPrime Button Taps the inlet ball when pushed to loosen it.
C Pressure Control Knob Increases (clockwise) and decreases (counter-clock-
wise) fluid pressure in pump, hose, and spray gun. To
select function, align symbol on pressure control knob
with setting indicator, page 13.
D ON/OFF Switch Turns sprayer ON and OFF.
E Suction Tube Draws fluid from paint pail into pump.
F Drain Tube Drains fluid in system during priming and pressure
relief.
G Airless Spray Gun Dispenses fluid.
H Reversible Spray Tip
• Atomizes fluid being sprayed, forms spray pattern
and controls fluid flow according to hole size.
• Reverse position unclogs plugged tips without dis-
assembly.
J Tip Guard Reduces risk of fluid injection injury.
K Gun Trigger Lock Prevents accidental triggering of spray gun.
L Gun Fitting Threaded connection for paint hose.
M Gun Filter Filters fluid entering spray gun to reduce tip clogs.
N Pump Pumps and pressurizes fluid and delivers it to paint
hose.
O Inlet Valve Allows paint to flow from paint bucket into the sprayer.
P/Y Airless Hose Connection/Outlet
Valve
Threaded connection for airless hose. Allows paint to
flow from the sprayer to the gun.
Q Airless Hose Transports high-pressure fluid from pump to spray
gun.
R
InstaClean
™
Filter
(ProLTS only)
• Filters fluid coming out of pump to reduce tip
plugging and improve finish.
• Self cleans only during pressure relief.
S Pail Hanger For transporting pail by its handle.
T Inlet Strainer Prevents debris from entering pump.
U Power Cord Plugs into power source.
V Easy Access Door
(ProLTS only)
Easy Access Door permits quick access to the pump.
Open pump door by pulling out on the tabs while slid-
ing door up.
W Suction Tube Drip Cup Holds the suction tube during transport to catch drips.
X Pump Removal Tool
(ProLTS only)
Cut out in the frame provide the tools to quickly
remove the pump packing without additional tools.
Z Inlet Valve Removal Tool
(ProLTS only)
Cut out in the frame provide the tools to quickly
remove the inlet valve without additional tools.
Power Flush Attachment Connects garden hose to suction tube for power flush-
ing water-based fluids.
To Next Page
Loading...
Need help?
General
