Graco TrueCoat 360 - Troubleshooting: Spray Pattern Defects; Spray Pattern Spitting Fixes

Troubleshooting
3A9014A 29
Spray pattern “spits” at the end or
beginning:
Excess material has
accumulated on Spray Tip
and Spray Tip Guard, or
Spray Tip is partially
plugged
Clean Spray Tip and Spray Tip
Guard. Clear Spray Tip. See
Clear Tip Clogs, page 19.
Spray Tip is not fully
inserted into Spray Tip
Guard
See Spray Tip Installation,
page 18.
Spray Tip is worn or
damaged
Replace Spray Tip.
Pump has reached its
maximum life
Replace pump.
Problem Cause Solution
ti15525a
ti15525a