~ ~~~~~ ~ ~ ~~~~~~
Technical
Data
Power Requirements
..............
230 VAC,
50
Hz,
1
phase,
7
amp
minimum
Working Pressure Range
...............
0
-
195 bar
Cycles/liter
.........
.:.
.......................
124
Maximum Delivery..
...................
1.8
liter/min
Power
Cord
.............
No.
14
AWG,
3
wire,
2.6
m
Inlet Paint Strainer
................
.1.
.
1190
micron
Stainless steel screen, reusable
Outlet Paint Filter
......................
250
micron
Stainless
steel
screen,
reusable
Pump Inlet
Size
....
i.
314
npt(m) with 20" ID chamfer
Wetted Parts:
Fluid Outlet Size 1/4
npsm from
fluid
filter
Displacement
Pump
...
Carbon
steel,
Polyurethane,
UHMW polyethylene, Delrinm,, Leather
Filter
......
Aluminum,
Carbon steel, Stainless steel,
...........
NOTE:
DelrinB
Dimensions
Weight
(dry
w/o
packaging)
.........
40
Kg (approx.)
Height
..................................
711
mm
Width 572
mm
Length
660
mm
..................................
...................................
The Graco Warranty and Disclaimers
WARRANTY
Graco warrants all equipment manufactured by it and bearing its name to be free from defects in material and workmanship
on
the
date of sale by an authorized Graco distributor to the original purchaser for use.
As
purchaser's sole remedy for breach of this war-
fective, with
the exception of defects in
parts
on
the
drive trainlgear box, which will be
repaired
or replaced for forty-eight months
ranty, Graco will, for a period
of twelve
months from
the date of sale, repair or replace
any part
of the Ultra equipment proven de
from the date of sale and the electric motor (excluding brush replacement, which is routine maintenance) or pressure control
assembly which will be repaired or replaced for twenty-four months from the date
of
sale. This warranty applies only when the
equipment is installed, operated and maintained in accordance with Graco's written recommendations.
This warranty does not cover, and Graco shall not be liablefor, any malfunction, damage or wear caused by faulty installation, mis-
application, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution
of
non-
Graco component parts. Nor shall Graco be liable for malfunction. damage or wear caused by the incompatibility with Graco
tion, operation or maintenance
of
structures, accessories, equipment or materials not
supplied by Graco.
equipment of structures, accessories, equipment or materials not supplied by Graco. or
the improper design, manufacture. installa-
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Gram distributor
for verification of the claim. If the claimed defect is verified, Giaco will repair or replace free of charge any defective parts. The
equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any
defect in material or workmanship. repairs will be made at a reasonable charge, which charges may include the costs
of
parts,
labor and transportation.
The terms of this warranty constitute purchaser's sole and exclusive remedy and are in lieu of any other warranties (express or
DISCLAIMERS AND LIMITATIONS
implied),
lncludlng warranty
of
rnerchantablllty or warranty
of
fltneaa for
a
particular purpose,
and of any non-contractual
damages or
loss
is expressly excluded and denied. In no case shall Graco's
liability
exceed the amount of the purchase price. Any
liabilities, including product liabilities, based on negligence or strict liability. Every form-of liabilityfor direct, special or consequential
action for breach of warranty must be brought within two
(2)
years
of
the date of sale.
EQUIPMENT NOT
COVERED
BY
GRACO WARRANTY
Graco makes no warranty, and disclaims all implied
warranties
of
rnerchantablllty and fltneaa
for
a
particular purpose,
with
respect to accessories, equipment, materials, or components sold
but
not manufactured by Graco. These items sold, but not
Graco will provide purchaser with reasonable assistance in making any claim for breach of these warranties.
manufactured by Graco (such as electric motor, switches, hose, etc.) are subject to the warranty,
U
any, of their manufacturer.
Foreign Offlcaa:
Canada, England, Korea, Switzerland, France, Germany,
Hong
Kong, Japan
Sales Offlces:
Atlanta, Chicago, Dallas, Detroit,
Los
Angeles, Mt. Arlington (N.J.)
GRACO INC.
EO.
BOX
1441 MINNEAPOLIS, MN 55440-1441
PRINTED IN
USA.
307-889 11-88
Revised
10-93
To Previous Page
Loading...
