3A9322B 17
Assembly Verification
After assembly is complete, perform the
following steps to verify proper operation. If
sprayer fails one of the steps, repeat sprayer
repair procedures.
• Rotate Prime Pump/Spray knob to
make sure it rotates forward to the spray
position and down to the prime pump
position.
• Fill cup assembly (10) with water and
verify sprayer primes and sprays. Follow
setup instructions in sprayer operation
manual for proper priming and spraying
procedure.
California Proposition 65
CALIFORNIA RESIDENTS
WARNING: Cancer and reproductive harm – www.P65warnings.ca.gov.
To Next Page
Loading...
