Graco XM User Manual

Pressure Relief Procedure
15
12. Hold a metal part of the gun firmly to a grounded
metal pail with a splash guard in place. Trigger gun
to flush mixed material out of line with clean solvent.
13. Shut off solvent pump air control valve (CB).
14. Repeat steps 11 and 12. Then continue to step 15.
15. Close solvent flush valve (AK) on mix manifold.
16. Release any residual gun pressure and engage trig-
ger lock.
AK
ti1949a

Graco XM Specifications

General

Brand	Graco
Model	XM
Category	Paint Sprayer
Language	English