Graco XM User Manual

Component Identification
12
User Interface
Buttons LEDs
There are four types of LEDs on the display.
F
IG. 4: User Interface
DA
DB
DD
DE
DF
DG
DH
DK
DP
DN
DM
DC
ti13365a
DR
DJ
Call
out Button Function
DA Display
Screen
Use to view GCA display. Ratio, Mode
Selection, Error Conditions, Totalizers,
System Information.
DB Start Initiates Active Run Mode function cur-
rently selected in Run Screen.
DC Stop Terminates Active Run Mode function
currently selected.
DD Enter Press to open drop-down fields, selection
options, and save values.
DE Alarm
Reset
Resets alarms.
DF Left/Right Move between screens in run or setup
modes.
DG Function Activates mode or action represented by
the icon above each of the four buttons in
the LCD.
DH Up/Down Move between selection boxes,
drop-down fields, and selectable values
within Setup screens.
DJ Setup Key
Lock
Change ratio or enter Setup mode.
DR USB Port Connection for data download. Use only
in non-hazardous areas.
Call
out LED Function
DK Blue Pump active
• on - pump is active
• off - pump is not active
DM Green Spray mode active
• selected mode is on (active)
• selected mode is off (inactive)
DN Red Alarm
• on - alarm is present
• off - no alarm
DP Yellow Warning
• on - warning is active. Can be
overridden when key is present
and turned.
• off - no warning indicated. Ratio
and setup fields are not change-
able.
• flashing - key is present and
turned. Ratio and setup fields
are changeable.

Graco XM Specifications

General

Brand	Graco
Model	XM
Category	Paint Sprayer
Language	English