EasyManuals Logo

Graco XP-H Series User Manual

Graco XP-H Series
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
System Components
3A0420ZAF 21
*Air Filter (MC)
Removes harmful dirt from compressed air supply. A
minimum 40 micron filter is used.
*Air Regulator (MB)
Adjusts air pressure to the motor and fluid outlet
pressure of pump. Locate the air regulator close to the
pump. Read air pressure on the gauge.
Fluid Line Components
*Fluid Manifold (FA): Controls circulation and
pump priming.
*Mix Manifold (FB): Combines A and B fluid into
one fluid line.
*Circulation Handle (FC): Directs fluid flow for
circulation or mixing. Move to open position to
relieve fluid pressure, prime pumps, and circulate
material in hoppers. Move to closed position to
spray mixed material.
*Dual Shutoff Handle (FE): Controls A and B fluid
flow for mixing and dispensing. Close before
flushing.
*Solvent Flush Valve (FD): Controls solvent flow to
the mix manifold, hose, and spray gun.
*Static mixer/gun hose kit: Thoroughly mixes the
two fluids and delivers the mixed fluid to the spray
gun. Includes static mixer and hoses to the spray
gun.
Fluid Heaters (F): Heats the resin and hardener
before mixing. Improves the chemical reaction and
lowers viscosity to improve the spray pattern.
Solvent Flush Pump (ZD): Flushes the mix
manifold. Includes a solvent pump, mounting
hardware, and solvent supply hose.

Table of Contents

Other manuals for Graco XP-H Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Graco XP-H Series and is the answer not in the manual?

Graco XP-H Series Specifications

General IconGeneral
BrandGraco
ModelXP-H Series
CategoryAirbrushes
LanguageEnglish

Related product manuals