12
6. OPERATION
6.1. USE OF THE SCALE
Once the unit is switched on, the weight display will indicate that the scale:
• is set to zero, meaning that there is no load placed on the platform.
• the reading is stable, that is to say, there is no external influencing
factor (such as an air current or the vibration of a nearby engine) that
may be producing significant disruption.
To find out the weight of any object within the scale’s maximum range, place
it on the load receptor platform: The zero reading and the stability reading
disappears from the indicator; the weight value will change until the stability
reading becomes visible again. The value indicated in the display is the result
of the measurement.
To Next Page
Loading...
Need help?
General
