Grandstream Networks GRP2601 Administration Guide

P a g e | 59
GRP260x Administration Guide
Version 1.0.1.18
OpenVPN® Transport
Specify the Transport Type of OpenVPN® whether UDP or TCP.
The default value is “UDP”.
OpenVPN® CA
Click on “Upload” to upload the Certification Authority of OpenVPN®. For a
new upload, users could click on “Delete” to erase the last certificate, and
then upload a new one.
OpenVPN® Certificate
Click on “Upload” to upload OpenVPN® certificate. For a new upload, users
could click on “Delete” to erase the last certificate, and then upload a new
one.
OpenVPN® Client Key
Click on “Upload” to upload OpenVPN® Key.
For a new upload, users could click on “Delete” to erase the last certificate,
and then upload a new one.
OpenVPN® Cipher
Method
Specifies the Cipher method used by the OpenVPN® server. The available
options are:
• Blowfish
• AES-128
• AES-256
• Triple-DES
The default setting is “Blowfish”.
OpenVPN® Username
Configures the optional username for authentication if the OpenVPN server
supports it.
OpenVPN® Password
Configures the optional password for authentication if the OpenVPN server
supports it.
Additional Options
Additional options to be appended to the OpenVPN® config file, separated
by semicolons. For example, comp-lzo no;auth SHA256
Note: Please use this option with caution. Make sure that the options are
recognizable by OpenVPN® and do not unnecessarily override the other
configurations above.
Network Settings → Advanced Settings
Advanced Network Settings
Enable LLDP
Controls the LLDP (Link Layer Discovery Protocol) service. The default
setting is “Enabled”.
LLDP TX Interval
Defines LLDP TX Interval (in seconds). Valid range is 1 to 3600. The default
setting is “60”.

Grandstream Networks GRP2601 Specifications

General

Brand	Grandstream Networks
Model	GRP2601
Category	IP Phone
Language	English