EasyManuals Logo

Grandstream Networks GXP1100 User Manual

Grandstream Networks GXP1100
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
FIRMWARE VERSION 1.0.8.4 GXP1100/GXP1105 USER MANUAL Page 15 of 53
USING THE GXP1100/GXP1105
GETTING FAMILAR WITH THE KEYPAD
The following table describes the buttons used on the GXP1100/GXP1105 keypad.
Table 4: GXP1100/GXP1105 KEYPAD DEFINITIONS
Hold. Place active call on hold, or resume the call on hold.
Flash. Flash key can be used for multiple purposes.
Call waiting. Bring up a new line; or answer the second incoming call.
3-way Conference. Establish 3-way conference when FLASH key is configured
as CONF. Before using the Flash key for 3-way conference, "Enable Flash key as
CONF" option has to be set to "Yes" under web GUI->Advanced Settings.
Transfer. Transfer an active call to another number.
Message. Retrieve voicemail messages.
Programmable hard key. It can be configured for multiple purposes: Speed dial,
Dial DTMF, VMsg, Call Return, 3-way Conference, Transfer, Intercom.
Mute. Press to mute/unmute an active call.
Send. It can be used as Send or Redial.
Send. Enter the digits and then press Send to dial out the number.
Redial. Redial when there is a previously dialed call.
Volume. Press "-" or "+" to adjust the volume.
0 - 9, *, #
Standard phone keypad.

Table of Contents

Other manuals for Grandstream Networks GXP1100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grandstream Networks GXP1100 and is the answer not in the manual?

Grandstream Networks GXP1100 Specifications

General IconGeneral
BrandGrandstream Networks
ModelGXP1100
CategoryIP Phone
LanguageEnglish

Related product manuals