Grandstream Networks GXP1100 User Manual

FIRMWARE VERSION 1.0.8.4 GXP1100/GXP1105 USER MANUAL Page 28 of 53
IP Setting
DHCP, Static IP or PPPoE.
IPv4 Address
The IPv4 address obtained on the phone.
IPv6 Address
The IPv6 address obtained on the phone.
Subnet Mask
The subnet mask obtained on the phone.
Gateway
The gateway address obtained on the phone.
DNS Server 1
The DNS server address 1.
DNS Server 2
The DNS server address 2.
NTP Server
The NTP server phone uses to sync up time.
PPPoE Link Up
PPPoE connection status.
802.1q/802.1p(LLDP)
The 802.1q/802.p status.
802.1q/VLAN Tag
The assigned VLAN tag on phone.
802.1q Priority
The assigned 802.1q priority on phone.
NAT Traversal
NAT traversal status for each account.
Status -> System Info
Product Model
Product model of the phone.
Part Number
Product part number.
Software Version
 Boot: boot version number;
 Core: core version number;
 Base: base version number;
 Prog: program version number. This is the main firmware release number,
which is always used for identifying the software system of the phone;
 Aux: Aux version number;
 Dsp: DSP version number.
System Up Time
System up time since the last reboot.
System Time
Current system time on the phone system.
Service Status
GUI and Phone service status.
Core Dump
Core dump file that could be downloaded for troubleshooting purpose.
ACCOUNT PAGE DEFINITIONS
Account 1 -> General Settings
Account Active
Activates/deactivates account. The default setting is "Yes".
Account Name
The name associated with the SIP account.
SIP Server
The URL or IP address, and port of the SIP server. This is provided by your
VoIP service provider (ITSP).
Secondary SIP Server
The URL or IP address, and port of the SIP server. This will be used when the

Grandstream Networks GXP1100 Specifications

General

Brand	Grandstream Networks
Model	GXP1100
Category	IP Phone
Language	English