FIRMWARE VERSION 1.0.8.4 GXP1100/GXP1105 USER MANUAL Page 16 of 53
MAKING PHONE CALLS
2 CALLS WITH 1 SIP ACCOUNT
GXP1100/GXP1105 can support up to two lines “virtually” mapped to one SIP account. By picking up the
handset, the GXP1100/GXP1105 will be in off hook state and the dial tone will be heard. To make a call,
dial out the number with the current line.
During the call, users can press the FLASH key to hold the current call and make/answer another call. If
they are 2 calls established, users can switch the two lines by pressing the FLASH key.
COMPLETING CALLS
The GXP1100/GXP1105 allows you to make phone calls after picking up the handset. There are four ways
to complete calls.
Dial. Enter the number and send out.
Take handset off hook. You shall hear dial tone from the handset;
Enter the number;
Press SEND key or # to dial out.
Redial. Redial the last dialed number.
Take handset off hook. You shall hear dial tone from the handset;
Press SEND key.
Speed Dial. Dial the number configured as Speed Dial on Multi Purpose Key.
Go to GXP1100/GXP1105 Web GUI->Settings->Programmable Keys, configure the
Multi-Purpose Key's Key Mode as Speed Dial. Enter the Description and Value (the number to be
dialed out) for the Multi-Purpose Key. Click on "Save and Apply" at the bottom of the Web GUI
page;
Take handset off hook. You shall hear dial tone from the handset;
Press the configured Speed Dial key.
Call Return. Dial the last answered call.
Go to GXP1100/GXP1105 Web GUI->Settings->Programmable Keys, configure the Multi
Purpose Key's Key Mode as Call Return. No Value has to be set on the Multi Purpose Key for Call
Return;
Take handset off hook. You shall hear dial tone from the handset;
Press the configured Call Return key to dial out.
To Next Page
Loading...
Need help?
General
