FIRMWARE VERSION 1.0.8.4 GXP1100/GXP1105 USER MANUAL Page 46 of 53
User can press “EndCall” softkey to end the page.
CLICK-TO-DIAL
From GXP1100/GXP1105 Web GUI, users could dial out with Click-to-Dial feature on the top menu
of the Web GUI when the account is registered. Before using the Click-To-Dial feature, make sure the
option "Click-To-Dial Feature" under web GUI->Settings->Call Features is turned on. By default it's
disabled and the dialing icon in web GUI is in grey .
After clicking on the icon, a new dialing window will show as the figure below. Enter number and click
on "Dial", the phone will go off hook and dial out the number from account 1.
Figure 5: Click-to-Dial
Additionally, users could directly send the command for the phone to dial out by specifying the following
URL in PC's web browser, or in the field as required in other call modules.
http://ip_address/cgi-bin/api-make_call?phonenumber=1234&account=0&password=admin/123
In the above link, replace the fields with
ip_address:
Phone's IP Address.
phonenumber=1234:
The number for the phone to dial out
account=0:
The account index for the phone to make call. The index is 0 for account 1, 1 for account 2, 2 for
account 3, and etc.
password=admin/123:
The admin login password or user login password of phone's Web GUI.
SAVING THE CONFIGURATION CHANGES
After users makes changes to the configuration, press the "Save" button will save but not apply the
changes until the "Apply" button on the top of web GUI page is clicked. Or, users could directly press "Save
and Apply" button. We recommend rebooting or powering cycle the phone after applying all the changes.
To Next Page
Loading...
Need help?
General
