FIRMWARE VERSION 1.0.8.4 GXP1100/GXP1105 USER MANUAL Page 43 of 53
sent or received SIP message (DEBUG level);
SIP message summary (INFO level);
inbound and outbound calls (INFO level);
registration status change (INFO level);
negotiated codec (INFO level);
ethernet link up (INFO level);
SLIC chip exception (WARNING and ERROR levels);
memory exception (ERROR level).
Configures whether the SIP log will be included in the syslog messages or not.
The default setting is "No".
Auto Recover From
Abnormal
Configures whether auto recover or not when the phone is running abnormal.
The default setting is "Yes".
Selects display language on the phone.
Specifies the language file postfix for downloaded language.
Enables TR-069. The default setting is "No".
URL for TR-069 Auto Configuration Servers (ACS).
Enables periodic inform. If set to "Yes", device will send inform packets to the
ACS. The default setting is "No".
Sets up the periodic inform interval to send the inform packets to the ACS.
Connection Request
Username
The user name for the ACS to connect to the phone.
Connection Request
Password
The password for the ACS to connect to the phone.
The port for the ACS to connect to the phone.
The Cert File for the phone to connect to the ACS via SSL.
The Cert Key for the phone to connect to the ACS via SSL.
SSL Certificate used for SIP TLS Transport.
SSL Private key used for SIP TLS Transport.
SIP TLS Private Key
Password
SSL Private key password used for SIP TLS Transport.